HAIPLEN EP50 T4 X0 Taro Plast Polypropylene Copolymer (Talc Filler, 20%)

Product Description

Polypropylene copolymer talcum filled 20% self extinguishing UL94 V0, good flow and mechanical properties.

Available: all colors, UV stabilized (L), heat stabilized (H), laser printable (LP), detergent stabilized(D)

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Talc Filler, 20% Filler by Weight

Additive

Heat Stabilizer

UV Stabilizer

Features

Copolymer

Detergent Resistant

Good Flow

Good UV Resistance

Heat Stabilized

Laser Markable

Self Extinguishing

Appearance

Colors Available

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage			ASTM D955
Flow		in/in
Across Flow		in/in
Water Absorption (73°F, 24 hr)		%	ASTM D570, ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ASTM D638, ISO 527-2
Tensile Strength (Yield)		psi	ASTM D638, ISO 527-2
Tensile Elongation (Break)		%	ASTM D638, ISO 527-2
Flexural Modulus		psi	ASTM D790, ISO 178
Flexural Strength		psi	ASTM D790, ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ISO 180, ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648, ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B, ASTM D1525²
Electrical	Nominal Value	Unit	Test Method
Comparative Tracking Index (Solution A)		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0591 in
0.126 in
Glow Wire Flammability Index (0.0787 in)		°F	IEC 60695-2-12
Oxygen Index		%	ASTM D2863
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HAIPLEN EP50 T4 X0, HAIPLEN , HAIPLENEP50T4X0, EP 50 T 4 X 0, EP50 T4 X0, EP50, 50T, T4, 4X, X0, EP50T4X0, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, Taro Plast, PolypropyleneCopolymer, PPCopolymer, 50EP
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Detergent Resistant, Detergent Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Self Extinguishing, Self-Extinguishing, Good Flow.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²Loading 2 (50 N)

HAIPLEN EP50 T4 X0

Polypropylene Copolymer

Talc Filler, 20%

Supplied by Taro Plast S.p.A.