|
Density
|
|
g/cm³
|
ISO 1183 |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Coefficient of Friction (vs. Itself - Dynamic, Blown Film)
|
|
|
ISO 8295 |
|
Film Thickness - Tested
|
|
mil
|
|
|
Film Thickness - Recommended / Available
|
|
|
|
|
Tensile Modulus
|
|
|
ISO 527-3 |
|
1% Secant, MD: 0.98 mil, Blown Film
|
|
psi
|
|
|
1% Secant, TD: 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Stress
|
|
|
ISO 527-3 |
|
MD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
MD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ISO 527-3 |
|
MD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
Dart Drop Impact 2 (0.98 mil, Blown Film)
|
|
g
|
ISO 7765-1 |
|
Elmendorf Tear Strength 3
|
|
|
ISO 6383-2 |
|
MD: 1.0 mil
|
|
lbf/in
|
|
|
TD: 1.0 mil
|
|
lbf/in
|
|
|
Brittleness Temperature
|
|
°F
|
ASTM D746 |
|
Vicat Softening Temperature
|
|
°F
|
ISO 306/A |
|
Melting Temperature
|
|
°F
|
Internal Method |
|
Gloss (45°, 0.984 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (0.984 mil, Blown Film)
|
|
%
|
ISO 14782 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Flexirene® FG 20 F, Flexirene FG 20 F, Flexirene® , Flexirene, FlexireneFG20F, FG 20 F, FG20, 20F, FG20F, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Polimeri Europa, PolyethyleneLinearLowDensity, 20FG
|
|
Features may also be described by the following terms: Butene Comonomer.
|
|
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
|