IDES Prospector Already have an account? Login Here

IDES

SARANEX™ 23P

Coextruded Barrier Film

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for SARANEX™ 23P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SARANEX™ 23P Coextruded Barrier Film is a multi-layer film designed for limited use protective garments. It contains Dow SARAN™ barrier resin, and is available as 2.0 mil, medium slip, natural color, TX, in widths from 10 to 62 inches (250 mm to 1570 mm).

General Characteristics:
  • Yield: 13,500 sq in./lb (19.2 m²/kg)
  • Thickness: 2.0 mil (51 µm)
  • Width: 10 - 62 in. (254 - 1575 mm)
  • Color: Natural
  • Treat: TX (untreated)
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Medium Slip
Appearance 
  • Natural Color
Forms 
  • Film
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 ASTM D374
Film Thickness - Recommended / Available
 
  
Secant Modulus
     ASTM D882
2% Secant, MD: 2.0 mil
psi
  
2% Secant, TD: 2.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Oxygen Transmission Rate (73°F, 2.0 mil, 50% RH)
cm³/100 in²/24 hr
 ASTM D3985
Water Vapor Transmission Rate (100°F, 2.0 mil, 90% RH)
g/100 in²/24 hr
 ASTM F1249
Heat Seal Strength 2
     Internal Method
MD
lbf/in
  
TD
lbf/in
  
Yield (2.0 mil)
in²/lb
 ASTM D4321
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SARANEX™ 23P, SARANEX 23P, SARANEX™ , SARANEX, SARANEX23P, 23 P, 23P, Polyvinylidene Chloride, PVDC, Polyvinyl Chloride, PVC, Dow, PolyvinylideneChloride, PolyvinylChloride, P23
Notes
1Typical properties: these are not to be construed as specifications.
21 sec preheat, 1 sec dwell, 30 psi (2.1 Bar), 350°F (177°C)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.