Biograde C 9555 FKuR Cellulose Acetate

General

Material Status

Availability

Features

Agency Ratings

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress			ISO 527-2
Yield		psi
Break		psi
Tensile Strain			ISO 527-2
Yield		%
Break		%
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/eA
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A
Melting Temperature (DSC)		°F	ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Biograde® C 9555, Biograde C 9555, Biograde® , Biograde, BiogradeC9555, C 9555, C9555, Cellulose Acetate, CA, FKuR, CelluloseAcetate, 9555C
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EN (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Suggested Max Regrind		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Back Pressure		psi
Injection Notes
Feeding zone: 60°C Cylinder kneeling temp: 150°C Screw peripheral velocity: up to 200 mm/s Shot volume: 1 until 3 D Holding pressure level: 40 to 90% Holding pressure time: short Melt cushion (of volume): 5 to 10% Cooling time: short

Biograde® C 9555