IDES Prospector Already have an account? Login Here

IDES

INEOS LDPE 21F564

Low Density Polyethylene

Supplied by INEOS Olefins & Polymers Europe

The technical datasheet with complete property values for INEOS LDPE 21F564 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LDPE film products

Applications:
21F564 is particularly suitable for the production of high quality, general purpose film and bags, including carrier bags. 21F564 is formulated with slip and antiblock agents.

Benefits and Features
21F564 is an easily extrudable LDPE homopolymer. It offers the following properties:
  • Good film optical properties
  • Good drawdown
  • Suitable for high quality printing

21F564 offers high slip film with easy opening properties when used pure in the thickness range 25-60 µm. The addition of other polymers, masterbatches and pigments, or the use of other thicknesses may alter film slip and antiblock properties.
If corona treatment is necessary, the level should normally be in the range 38-48 mN/m.
We recommend that you consult your INEOS O&P Europe technical representative for further advice on the use of 21F564.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock (1200 ppm) 1
  • Antioxidant
  • Erucamide Slip (600 ppm)
Features 
  • Antiblocking
  • Antioxidant
  • Excellent Printability
  • Good Drawdown
  • Homopolymer
  • Opticals
  • Slip
Uses 
  • Bags
  • Film
  
RoHS Compliance 
Processing Method 
  • Blown Film
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density 3
g/cm³
 ISO 1183/D
Melt Mass-Flow Rate (MFR) 4 (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 1184
1% Secant, MD: 2.0 mil, Blown Film
psi
  
1% Secant, TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 1184
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 1184
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Dart Drop Impact (2.0 mil, Blown Film)
g
 ASTM D1709A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS LDPE 21F564, INEOS LDPE , INEOSLDPE21F564, INEOSLDPE, LDPE 21 F 564, LDPE21F564, LDPE21, LDPE, 21 F 564, 21F564, 21F, F564, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, Ineos Polyolefins, PolyethyleneLowDensity, F21, 21LDPE
Features
Features may also be described by the following terms: Excellent Printability, Printable, Good Drawdown, Good draw down, Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1silica
2Typical properties: these are not to be construed as specifications.
3Conditioned according to ISO 1872/1
4Condition 4
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.