IDES Prospector Already have an account? Login Here

IDES

Supol HT980/1

Polypropylene Copolymer

Talc Filler, 30%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Supol HT980/1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SUPOL HT980/1 medium high melt flow, 3,300 MPa flexural modulus, 30% talc-filled polypropylene copolymer has a good combination of properties and processability. It was designed for primarily for cowl cover applications. Applicable Hyundai Motor Company Specification: MS213-28 Type 3.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Talc Filler, 30% Filler by Weight
Features 
  • Copolymer
  • Good Moldability
  • Good Processability
  • High Flow
  • High Strength
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain
     ISO 527-2
Yield, 73°F
%
  
Break, 73°F
%
  
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Supol HT980/1, Supol HT9801, Supol , SupolHT9801, HT 980, HT 980 1, HT980/1, HT9801, HT980:1, HT980+1, HT980-1, HT980_1, HT980 1, HT980, 9801, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, 980HT
Features
Features may also be described by the following terms: Good Moldability, High Strength, High Flow, High Melt, High MFI, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): HYUNDAI (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.