IDES Prospector Already have an account? Login Here

IDES

NEOFLON™ AC-5820

Perfluoroalkoxy

Supplied by DAIKIN AMERICA, INC.

The technical datasheet with complete property values for NEOFLON™ AC-5820 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
NEOFLON Coating Powder is a high performance material made from fluoropolymer resin.
Two kinds of NEOFLON Coating Powders, NEOFLON FEP, and PFA Coating Powder, are available.
NEOFLON FEP Coating Powder is a fine powder made of tetrafluoroethylene and hexafluoropropylene copolymer and
NEOFLON PFA Coating Powder is a fine powder made of tetrafluoroethylene and perfluoroalkylvinylether copolymer.
NEOFLON FEP and PFA Coating Powder are low in melt viscosity and excellent in melt fluidity which can give a coating free of pinholes.
NEOFLON FEP and PFA are ideal for use as corrosion resistant linings because of their excellent thermal and chemical resistance properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Combustion Resistant
  • Good Chemical Resistance
  • Good Corrosion Resistance
  • Good Electrical Properties
  • Good Flow
  • Good Weather Resistance
  • High ESCR (Stress Crack Resist.)
  • High Purity
  • Low Viscosity
Uses 
  • Coating Applications
  • Liners
  
Appearance 
  • White
Forms 
  • Powder
Processing Method 
  • Coating
  • Rotational Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Apparent Density
g/cm³
 JIS K6891
Melt Mass-Flow Rate (MFR) (372°C/5.0 kg)
g/10 min
 ASTM D3307
Particle Size 2
mil
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 JIS K6888
Tensile Elongation (Break)
%
 JIS K6888
Coefficient of Friction (vs. Itself - Static)
 
 Internal Method
Taber Abrasion Resistance (CS-17 Wheel)
mg
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ASTM D3307
Additional Information
Nominal Value
Unit
Test Method
Adhesion Strength - Peel Test 3
lbf/in
  
Contact Angle 4
      
Hexadecane
°
  
Water
°
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NEOFLON™ AC-5820, NEOFLON AC5820, NEOFLON™ , NEOFLON, NEOFLONAC5820, AC, AC-5820, AC5820, AC:5820, AC/5820, AC+5820, AC_5820, AC 5820, Perfluoroalkoxy, PFA, Fluoropolymer, Daikin, 5820AC
Features
Features may also be described by the following terms: Low Viscosity, Good Flow, Good Corrosion Resistance, Corrosion Resistant, Good Chemical Resistance, Chemical Resistant, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Electrical Properties, Good Weather Resistance, Weather Resistant, Combustion Resistant, Resists Combustion, High Purity.
Notes
1Typical properties: these are not to be construed as specifications.
2Laser Diffraction
31) steel substrate are roughened with 80 ~ 120 mesh sand
2) applied two coat primer EK-1083G,EK-1883GB
3) applied NEOFLON Coating Powder into 500 µm thickness.
4Goniometer
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.