IDES Prospector Already have an account? Login Here

IDES

POLYMAN® (ABS) LP 299/2 GL

Acrylonitrile Butadiene Styrene

Supplied by A. Schulman Europe

The technical datasheet with complete property values for POLYMAN® (ABS) LP 299/2 GL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Medium impact ABS grade
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • South America
Features 
  • Medium Impact Resistance
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Burning Rate (0.0787 in)
in/min
 ISO 3795
Flammability Classification
     IEC 60695-11-10, -20
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index
     IEC 60695-2-12
0.0591 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature
     IEC 60695-2-13
0.0591 in
°F
  
0.118 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYMAN® LP 299/2 GL, POLYMAN LP 299 2 GL, POLYMAN® (ABS) LP 299/2 GL, POLYMAN ABS LP 2992 GL, POLYMAN® , POLYMAN, POLYMANABSLP2992GL, LP 299, LP 2992 GL, (ABS) LP 299, ABS LP 299, LP 299/2 GL, LP 299 2 GL, LP2992GL, ABSLP299, (ABS) LP 299/2 GL, ABS LP 2992 GL, (ABS) LP 299:2 GL, LP 299:2 GL, (ABS) LP 299+2 GL, LP 299+2 GL, (ABS) LP 299-2 GL, LP 299-2 GL, (ABS) LP 299_2 GL, LP 299_2 GL, (ABS) LP 299 2 GL, ABSLP, LP299, 2992, 2GL, LP299_2GL, ABSLP2992GL, ABS LP 299_2 GL, ABS LP 299 2 GL, ABSLP299_2GL, Acrylonitrile Butadiene Styrene, ABS, A. Schulman Eur, AcrylonitrileButadieneStyrene, LPABS, 299LP
Features
Features may also be described by the following terms: Medium Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.