IDES Prospector Already have an account? Login Here

IDES

POLYMAN® (ASA) M/MI 2010

Acrylonitrile Styrene Acrylate

Supplied by A. Schulman Europe

The technical datasheet with complete property values for POLYMAN® (ASA) M/MI 2010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
medium impact ASA grade with good weatherability for injection molding
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • South America
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • ASA
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
 
 
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Flammability Classification
    IEC 60695-11-10, -20
0.0591 in
 
 
0.118 in
 
 
Glow Wire Flammability Index
    IEC 60695-2-12
0.0591 in
°F
 
0.118 in
°F
 
Glow Wire Ignition Temperature
    IEC 60695-2-13
0.0591 in
°F
 
0.118 in
°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYMAN® M/MI 2010, POLYMAN M MI 2010, POLYMAN® (ASA) M/MI 2010, POLYMAN ASA MMI 2010, POLYMAN® , POLYMAN, POLYMANASAMMI2010, MMI 2010, (ASA) M, ASA M, M/MI 2010, M MI 2010, MMI2010, (ASA) M/MI 2010, ASA MMI 2010, (ASA) M:MI 2010, M:MI 2010, (ASA) M+MI 2010, M+MI 2010, (ASA) M-MI 2010, M-MI 2010, (ASA) M_MI 2010, M_MI 2010, (ASA) M MI 2010, ASAM, MMI, MI2010, M_MI2010, ASAMMI2010, ASA M_MI 2010, ASA M MI 2010, ASAM_MI2010, Acrylonitrile Styrene Acrylate, ASA, A. Schulman Eur, AcrylonitrileStyreneAcrylate, MASA, MIM
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.