IDES Prospector Already have an account? Login Here

IDES

POLYMAN® (PMMA) M/21

Polymethyl Methacrylate Acrylic

Supplied by A. Schulman Europe

The technical datasheet with complete property values for POLYMAN® (PMMA) M/21 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High flow PMMA grade
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • South America
Features 
  • Good Flow
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PMMA
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (230°C/3.8 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Break)
psi
ISO 527-2/1A/5
Tensile Strain (Break)
%
ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/Af
Vicat Softening Temperature
°F
ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYMAN® M/21, POLYMAN M 21, POLYMAN® (PMMA) M/21, POLYMAN PMMA M21, POLYMAN® , POLYMAN, POLYMANPMMAM21, (PMMA) M, PMMA M, M/21, M 21, (PMMA) M/21, PMMA M21, (PMMA) M:21, M:21, (PMMA) M+21, M+21, (PMMA) M-21, M-21, (PMMA) M_21, M_21, (PMMA) M 21, PMMAM, M21, PMMAM21, PMMA M_21, PMMA M 21, Acrylic, PMMAM_21, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, A. Schulman Eur, AcrylicPolymethylMethacrylate, AcrylicPMMA, MPMMA, 21M
Features
Features may also be described by the following terms: Good Flow.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.