IDES Prospector Already have an account? Login Here

IDES

SCHULABLEND® (ABS/PA) M/MK 8 GF

Acrylonitrile Butadiene Styrene + Nylon

Glass Fiber Reinforcement, 8.0%

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULABLEND® (ABS/PA) M/MK 8 GF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
8% glass fibre reinforced ABS/PA blend
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 8.0% Filler by Weight
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Volume-Flow Rate (MVR) (250°C/5.0 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flammability Classification (0.0630 in)
 
 IEC 60695-11-10, -20
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULABLEND® M/MK 8 GF, SCHULABLEND M MK 8 GF, SCHULABLEND® (ABS/PA) M/MK 8 GF, SCHULABLEND ABSPA MMK 8 GF, SCHULABLEND® , SCHULABLEND, SCHULABLENDABSPAMMK8GF, MMK 8 GF, (ABS, ABS, M/MK 8 GF, M MK 8 GF, MMK8GF, (ABS/PA) M/MK 8 GF, ABSPA MMK 8 GF, (ABS:PA) M:MK 8 GF, M:MK 8 GF, (ABS+PA) M+MK 8 GF, M+MK 8 GF, (ABS-PA) M-MK 8 GF, M-MK 8 GF, (ABS_PA) M_MK 8 GF, M_MK 8 GF, (ABS PA) M MK 8 GF, ABSPA, PAM, MMK, MK8, 8GF, M_MK8GF, ABSPAMMK8GF, ABS_PA M_MK 8 GF, ABS PA M MK 8 GF, ABS_PAM_MK8GF, Acrylonitrile Butadiene Styrene + Nylon, Acrylonitrile Butadiene Styrene Nylon, Acrylonitrile Butadiene Styrene : Nylon, Acrylonitrile Butadiene Styrene / Nylon, Acrylonitrile Butadiene Styrene - Nylon, Acrylonitrile Butadiene Styrene _ Nylon, Acrylonitrile Butadiene Styrene Nylon, ABS+Nylon, ABSNylon, ABS:Nylon, ABS/Nylon, ABS-Nylon, ABS_Nylon, ABS Nylon, Acrylonitrile Butadiene Styrene, A. Schulman Eur, AcrylonitrileButadieneStyreneNylon, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_Nylon, PAABS, MKM
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.