IDES Prospector Already have an account? Login Here

IDES

SCHULABLEND® (PC/ASA) WR 5 HI SF

Acrylonitrile Styrene Acrylate + PC

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULABLEND® (PC/ASA) WR 5 HI SF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High flow and high impact PC/ASA blend
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Flow
  • Impact Modified
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULABLEND® WR 5 HI SF, SCHULABLEND WR 5 HI SF, SCHULABLEND® (PC/ASA) WR 5 HI SF, SCHULABLEND PCASA WR 5 HI SF, SCHULABLEND® , SCHULABLEND, SCHULABLENDPCASAWR5HISF, (PC, PC, WR 5 HI SF, WR5HISF, (PC/ASA) WR 5 HI SF, PCASA WR 5 HI SF, (PC:ASA) WR 5 HI SF, (PC+ASA) WR 5 HI SF, (PC-ASA) WR 5 HI SF, (PC_ASA) WR 5 HI SF, (PC ASA) WR 5 HI SF, PCASA, ASAWR, WR5, 5HI, HISF, PCASAWR5HISF, PC_ASA WR 5 HI SF, PC ASA WR 5 HI SF, PC_ASAWR5HISF, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, A. Schulman Eur, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, ASAPC, 5WR
Features
Features may also be described by the following terms: Good Flow.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.