SCHULADUR® A BS 40 HI A. Schulman Eur Polybutylene Terephthalate (Barium Sulfate, 40%)

Product Description

40% Barium sulfate filled, impact modified PBT-grade

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain (Break)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Ball Pressure Test (392°F)			IEC 60695-10-2
Flammability	Nominal Value	Unit	Test Method
Flammability Classification			IEC 60695-11-10, -20
0.0591 in
0.118 in
Glow Wire Flammability Index			IEC 60695-2-12
0.0591 in		°F
0.118 in		°F
Glow Wire Ignition Temperature			IEC 60695-2-13
0.0591 in		°F
0.118 in		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULADUR® A BS 40 HI, SCHULADUR A BS 40 HI, SCHULADUR® , SCHULADUR, SCHULADURABS40HI, A BS 40 HI, ABS, BS40, 40HI, ABS40HI, Polybutylene Terephthalate, PBT, Polyester, A. Schulman Eur, PolybutyleneTerephthalate, BSA
Features
Features may also be described by the following terms: Good Surface Finish, Low Warpage, Low Warp.

Notes

¹Typical properties: these are not to be construed as specifications.

SCHULADUR® A BS 40 HI