IDES Prospector Already have an account? Login Here

IDES

SCHULAMID® 6 GF 15 HI BM

Polyamide 6

Glass Fiber Reinforcement, 15%

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULAMID® 6 GF 15 HI BM is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
15% glass fiber reinforced and impact modified Polyamide 6 with high melt strength for blowmoulding processing
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
Features 
  • Good Heat Aging Resistance
  • Good Processing Stability
  • High Impact Resistance
  • High Melt Stability
  • High Viscosity
  • Oil Resistant
Processing Method 
  • Blow Molding
  • Injection Molding
  
Resin ID (ISO 1043)
  • PA6I GF15
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Burning Rate (0.0787 in)
in/min
 ISO 3795
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 6 GF 15 HI BM, SCHULAMID 6 GF 15 HI BM, SCHULAMID® , SCHULAMID, SCHULAMID6GF15HIBM, 6 GF 15 HI BM, 6GF, GF15, 15HI, HIBM, 6GF15HIBM, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, A. Schulman Eur, Polyamide6, Nylon6, GF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Heat Aging Resistance, High Impact Resistance, High Melt Stability, Good Processing Stability, Good Process Stability, High Viscosity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.