SCHULAMID® 6 MKF 3010 HI A. Schulman Eur Polyamide 6 (Glass\Mineral, 30%)

Product Description

30% glass fiber and mineral reinforced Polyamide 6 with high impact

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain (Break)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Burning Rate		in/min	ISO 3795
Flammability Classification			IEC 60695-11-10, -20
0.0591 in
0.118 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 6 MKF 3010 HI, SCHULAMID 6 MKF 3010 HI, SCHULAMID® , SCHULAMID, SCHULAMID6MKF3010HI, 6 MKF 3010 HI, 6MKF, MKF3010, 3010HI, 6MKF3010HI, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, A. Schulman Eur, Polyamide6, Nylon6, MKF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Good Toughness, Tough, High Impact Resistance.

Notes

¹Typical properties: these are not to be construed as specifications.

SCHULAMID® 6 MKF 3010 HI