IDES Prospector Already have an account? Login Here

IDES

SCHULADUR® A3 GF 30 TS SCHWARZ

Polybutylene Terephthalate + ASA

Glass Fiber Reinforcement, 30%

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULADUR® A3 GF 30 TS SCHWARZ is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
30% glass fibre reinforced PBT/ASA-blend with high surface quality and reduced warpage
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Surface Finish
  • Low Warpage
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Volume-Flow Rate (MVR) (250°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flammability Classification
     IEC 60695-11-10, -20
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index
     IEC 60695-2-12
0.0591 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature
     IEC 60695-2-13
0.0591 in
°F
  
0.118 in
°F
  
Oxygen Index
%
 ISO 4589-2
Flammability
in/min
 FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULADUR® A3 GF 30 TS SCHWARZ, SCHULADUR A3 GF 30 TS SCHWARZ, SCHULADUR® , SCHULADUR, SCHULADURA3GF30TSSCHWARZ, A 3 GF 30 TS SCHWARZ, A3 GF 30 TS SCHWARZ, A3, 3GF, GF30, 30TS, TSSCHWARZ, A3GF30TSSCHWARZ, Polybutylene Terephthalate + ASA, Polybutylene Terephthalate ASA, Polybutylene Terephthalate : ASA, Polybutylene Terephthalate / ASA, Polybutylene Terephthalate - ASA, Polybutylene Terephthalate _ ASA, Polybutylene Terephthalate ASA, PBT+ASA, PBTASA, PBT:ASA, PBT/ASA, PBT-ASA, PBT_ASA, PBT ASA, Polyester, A. Schulman Eur, PolybutyleneTerephthalateASA, PolybutyleneTerephthalate_ASA, 3A
Features
Features may also be described by the following terms: Good Surface Finish, Low Warpage, Low Warp.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.