IDES Prospector Already have an account? Login Here

IDES

SCHULAMID® 12 MV HI

Polyamide 12

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULAMID® 12 MV HI is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Impact modified polyamid 12
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Central America
  • Europe
  • Latin America
  • North America
Features 
  • Fuel Resistant
  • Good Chemical Resistance
  • Good Corrosion Resistance
  • Good Dimensional Stability
  • High Impact Resistance
  • Low Moisture Absorption
  • Low Temperature Toughness
  • Low to No Water Absorption
  • Medium Viscosity
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Nominal Tensile Strain at Break
%
 ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Burning Rate (0.0787 in)
in/min
 ISO 3795
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 12 MV HI, SCHULAMID 12 MV HI, SCHULAMID® , SCHULAMID, SCHULAMID12MVHI, 12 MV HI, 12MV, MVHI, 12MVHI, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, A. Schulman Eur, Polyamide12, Nylon12, MV12
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Low Water Absorption, Low Moisture Absorption, Water Resistant, Moisure Resistant, Medium Viscosity, Low Temperature Toughness, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, High Impact Resistance, Good Dimensional Stability, Dimensionally Stable, Good Corrosion Resistance, Corrosion Resistant, Good Chemical Resistance, Chemical Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.