IDES Prospector Already have an account? Login Here

IDES

SCHULAMID® 6 GF 30 H LW

Polyamide 6

Glass Fiber Reinforcement, 30%

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULAMID® 6 GF 30 H LW is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
30 % glassfiber reinforced and heatstabilized PA 6 Compound, transparent for laserlight in laser welding applications
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PA6-GF
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
°F
 ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Burning Rate (0.0787 in)
in/min
 ISO 3795
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 6 GF 30 H LW, SCHULAMID 6 GF 30 H LW, SCHULAMID® , SCHULAMID, SCHULAMID6GF30HLW, 6 GF 30 H LW, 6GF, GF30, 30H, HLW, 6GF30HLW, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, A. Schulman Eur, Polyamide6, Nylon6, GF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.