IDES Prospector Already have an account? Login Here

IDES

Ad-Tech Epoxy ES-215-IHG H

Epoxy; Epoxide

Supplied by Ad-Tech Plastic Systems Corp.

The technical datasheet with complete property values for Ad-Tech Epoxy ES-215-IHG H is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ES-215 SERIES HIGH-TEMP SURFACE COATS were developed to meet the requirements of the aircraft and aerospace industry for use which demands higher temperature applications greater than 170°C/350°F. These surface coats have proven in tests that their compatibility with prepreg systems produce excellent surface conditions cured under heat and vacuum bagging. The thermo-cycling of these systems exhibit a great degree of high physical stability when used in tooling and composite fabrication. These systems are versatile in that they can be used in RHL and IHL heat environment applications. These qualities allow the fabricator a single system which will sustain both specifications in deference to using two different systems. These systems are hygienically safe for shop usage as they do not contain MDA OR VCHD. Use in conjunction with any ADTECH high-temp laminating resin.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Adhesion
  • Good Thermal Stability
  • Non-MDA Cured
Uses 
  • Aerospace Applications
  • Aircraft Applications
  • Coating Applications
  • Molds/Dies/Tools
  • Repairing Material
Appearance 
  • Amber
  • Black
  
Forms 
  • Paste
Processing Method 
  • Coating
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Moisture Absorption
%
 ASTM D570
Viscosity
      
Hardener
mPa·s
  
Resin
 
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength (Break)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength (Break)
psi
 ASTM D790
Compressive Strength - Ultimate
psi
 ASTM D965
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
CLTE - Flow
in/in/°F
 ASTM D696
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Shelf Life
      
-- 2
wk
  
-- 3
wk
  
Thermoset Mix Viscosity (77°F)
cP
 ASTM D2393
Demold Time
min
  
Tack Free Time
hr
  
Additional Information
Nominal Value
Unit
Test Method
Work Life
hr
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ad-Tech Epoxy ES-215-IHG H, AdTech Epoxy ES215IHG H, Ad-Tech Epoxy , AdTech Epoxy, Ad:Tech Epoxy, Ad/Tech Epoxy, Ad+Tech Epoxy, Ad_Tech Epoxy, Ad Tech Epoxy, AdTechEpoxyES215IHGH, AdTechEpoxy, Ad_TechEpoxy, ES, EpoxyES-215-IHG H, EpoxyES215IHG H, EpoxyES:215:IHG H, EpoxyES/215/IHG H, EpoxyES+215+IHG H, EpoxyES_215_IHG H, EpoxyES 215 IHG H, EpoxyES215, EpoxyES, EpoxyES215IHGH, ES-215-IHG H, ES215IHG H, ES:215:IHG H, ES/215/IHG H, ES+215+IHG H, ES_215_IHG H, ES 215 IHG H, ES215, 215IHG, IHGH, EpoxyES_215_IHGH, ES215IHGH, ES_215_IHGH, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Ad-Tech, EpoxyEpoxide, 215ES, 215EpoxyES
Features
Features may also be described by the following terms: Good Adhesion, Non-MDA Cured, Good Thermal Stability.
Uses
Uses may also be described by the following terms: Molds/Dies/Tools, Molds, Dies, tools.
Notes
1Typical properties: these are not to be construed as specifications.
2Resin in original nopened container
3Hardener in original nopened container
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.