IDES Prospector Already have an account? Login Here

IDES

LNP* Lubricomp* Cycoloy_C2801R

Acrylonitrile Butadiene Styrene + PC

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Lubricomp* Cycoloy_C2801R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Lubricomp* Cycoloy_C2801R compound is a 5% PTFE reinforced PC+ABS wear resistant, flame retardant compound for moving components in business equipment. 30% recycle content.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • PTFE Lubricant (50000 ppm)
Recycled Content 
  • Yes, 30%
Features 
  • Flame Retardant
  • Good Wear Resistance
  • Lubricated
Uses 
  • Business Equipment
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
K (wear) Factor 2
 
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 3 (Break)
%
 ASTM D638
Flexural Modulus 4 (3.94 in Span)
psi
 ASTM D790
Flexural Strength 4 (Yield, 3.94 in Span)
psi
 ASTM D790
Coefficient of Friction
     ASTM D1894
vs. Steel - Dynamic
 
  
vs. Steel - Static
 
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.252 in)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0590 in
 
  
0.0980 in
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubricomp* Cycoloy_C2801R, LNP Lubricomp Cycoloy_C2801R, LNP* Lubricomp* , LNP Lubricomp, LNPLubricompCycoloy_C2801R, LNPLubricomp, Cycoloy, Cycoloy C 2801 R, Cycoloy_C2801R, Cycoloy:C2801R, Cycoloy/C2801R, Cycoloy+C2801R, Cycoloy-C2801R, Cycoloy C2801R, CycoloyC, C2801, 2801R, CycoloyC2801R, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, CCycoloy
Features
Features may also be described by the following terms: Good Wear Resistance, Wear Resistant.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2xE-10, PV=2000 psi-fpm vs Steel
3Type I, 2.0 in/min
40.10 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.