IDES Prospector Already have an account? Login Here

IDES

LNP* Lubriloy* Lexan_WR6300

Acrylonitrile Ethylene Styrene + PC + SAN

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Lubriloy* Lexan_WR6300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Lubriloy* Lexan_WR6300 compound is a wear resistant PC+SAN, with proprietary lubricant, for business equipment applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Lubricant
Features 
  • Lubricated
Uses 
  • Business Equipment
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Volume-Flow Rate (MVR) (300°C/2.16 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 3 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
CLTE
     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0590 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubriloy* Lexan_WR6300, LNP Lubriloy Lexan_WR6300, LNP* Lubriloy* , LNP Lubriloy, LNPLubriloyLexan_WR6300, LNPLubriloy, Lexan, Lexan WR 6300, Lexan_WR6300, Lexan:WR6300, Lexan/WR6300, Lexan+WR6300, Lexan-WR6300, Lexan WR6300, LexanWR, WR6300, LexanWR6300, Acrylonitrile Ethylene Styrene + PC + SAN, Acrylonitrile Ethylene Styrene PC SAN, Acrylonitrile Ethylene Styrene : PC : SAN, Acrylonitrile Ethylene Styrene / PC / SAN, Acrylonitrile Ethylene Styrene - PC - SAN, Acrylonitrile Ethylene Styrene _ PC _ SAN, Acrylonitrile Ethylene Styrene PC SAN, AES+PC+SAN, AESPCSAN, AES:PC:SAN, AES/PC/SAN, AES-PC-SAN, AES_PC_SAN, AES PC SAN, Acrylonitrile Ethylene Styrene, AES, SABIC IP, AcrylonitrileEthyleneStyrenePCSAN, AcrylonitrileEthyleneStyrene, AcrylonitrileEthyleneStyrene_PC_SAN, WRLexan
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.051 in/min
4Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.