IDES Prospector Already have an account? Login Here

IDES

Toyolac® 180-X18

Acrylonitrile Butadiene Styrene

Supplied by Toray Resin Company

The technical datasheet with complete property values for Toyolac® 180-X18 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
  • North America
  
Features 
  • Electrically Insulating
  • Good Chemical Resistance
  • Good Colorability
  • Good Corrosion Resistance
  • Good Heat Aging Resistance
  • Good Impact Resistance
  • Good Processability
  • High Rigidity
  • High Strength
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Elongation
     ASTM D638
Yield, 73°F
%
  
Break, 73°F
%
  
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (Yield, 73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.126 in
ft·lb/in
  
-22°F, 0.500 in
ft·lb/in
  
32°F, 0.126 in
ft·lb/in
  
32°F, 0.500 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
73°F, 0.500 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (All Colors)
 
 UL 94
Additional Information
Melt flow index, 220°C/10 kg: 1.8 to 2.2 g/10 min.
Melt viscosity, Plunger type viscometer: 3.5 to 5.0 x 10³ Poise
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Toyolac® 180-X18, Toyolac 180X18, Toyolac® , Toyolac, Toyolac180X18, 180, 180 X 18, 180-X18, 180X18, 180:X18, 180/X18, 180+X18, 180_X18, 180 X18, 180X, X18, Acrylonitrile Butadiene Styrene, ABS, Toray, AcrylonitrileButadieneStyrene, X180
Features
Features may also be described by the following terms: Good Chemical Resistance, Chemical Resistant, Good Colorability, Good Corrosion Resistance, Corrosion Resistant, Good Heat Aging Resistance, Good Impact Resistance, Good Processability, Easy Processing, High Rigidity, High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.