IDES Prospector Already have an account? Login Here

IDES

LNP* Thermocomp* 9X02841

Polycarbonate + PBT

Proprietary Filler

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Thermocomp* 9X02841 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Thermocmop* 9X02841 is a PBT/Polycarbonate blend containing proprietary fillers.

Also known as: LNP* Thermocomp* Compound PDX-02841
Product Reorder name: 9X02841
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Proprietary Filler
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Water Absorption
      
24 hr, 50% RH
%
 ASTM D570
Equilibrium, 73°F, 50% RH
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength
      
--
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Break, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
73°F
ft·lb/in
 ASTM D256
73°F 6
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
73°F 6
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact
      
73°F, Total Energy
in·lb
 ASTM D3763
--
ft·lb
 ISO 6603-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 7
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 7
°F
 ISO 75-2/Af
CLTE
     ASTM D696
Flow: -22 to 86°F
in/in/°F
  
Transverse: -22 to 86°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermocomp* 9X02841, LNP Thermocomp 9X02841, LNP* Thermocomp* , LNP Thermocomp, LNPThermocomp9X02841, LNPThermocomp, 9 X 02841, 9X02841, 9X, X02841, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, SABIC IP, PolycarbonatePBT, Polycarbonate_PBT, X9
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
680*10*4
780*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.