IDES Prospector Already have an account? Login Here

IDES

LNP* Thermotuf* PX07437

Polyamide 6

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Thermotuf* PX07437 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Compound based on Nylon 6 resin containing glass fiber and impact modifier.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • Impact Modifier
Features 
  • Impact Modified
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 3
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 3
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 4 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 4 (Break, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
ft·lb/in
 ASTM D4812
Instrumented Dart Impact
     ASTM D3763
73°F, Energy at Peak Load
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.126 in)
°F
 ASTM D648
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermotuf* PX07437, LNP Thermotuf PX07437, LNP* Thermotuf* , LNP Thermotuf, LNPThermotufPX07437, LNPThermotuf, PX 07437, PX07437, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, SABIC IP, Polyamide6, Nylon6, 07437PX
Generic Name
Generic Name may also be described by the following terms: PA6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 0.20 in/min
40.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.