IDES Prospector Already have an account? Login Here

IDES

LNP* Thermotuf* RF008IS

Polyamide 66

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Thermotuf* RF008IS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Thermotuf* RF008IS is a compound based on Nylon 66 resin containing Glass Fiber. Added features of this material include: High Impact.

Also known as: LNP* Thermotuf* Compound RF-1008 HI HS
Product reorder name: RF008IS
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • High Impact Resistance
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow (24 hr)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 2 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 2 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3 (264 psi, Unannealed, 2.52 in Span)
°F
 ISO 75-2/Af
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermotuf* RF008IS, LNP Thermotuf RF008IS, LNP* Thermotuf* , LNP Thermotuf, LNPThermotufRF008IS, LNPThermotuf, RF 008 IS, RF008IS, RF008, 008IS, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, SABIC IP, Polyamide66, Nylon66, 008RF
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: High Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4
380*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.