IDES Prospector Already have an account? Login Here

IDES

LNP* Verton* RV006ESV_GY7E071

Polyamide 66

Long Glass Fiber, 30%

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for LNP* Verton* RV006ESV_GY7E071 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Preliminary Data for 30% long glass fiber, single pellet color gray, PA66
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Long Glass Fiber, 30% Filler by Weight
Appearance 
  • Grey
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Water Absorption
      
24 hr, 50% RH
%
 ASTM D570
Equilibrium, 73°F, 50% RH
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield
%
 ISO 527-2/5
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus
      
1.97 in Span 4
psi
 ASTM D790
-- 5
psi
 ISO 178
Flexural Strength
      
-- 5, 6
psi
 ISO 178
Break, 1.97 in Span 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
-40°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-40°F 7
ft·lb/in²
 ISO 180/1A
73°F 7
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
73°F
ft·lb/in
 ASTM D4812
-40°F 7
ft·lb/in²
 ISO 180/1U
73°F 7
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact
     ASTM D3763
73°F, Energy at Peak Load
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.126 in
°F
 ASTM D648
66 psi, Unannealed, 2.52 in Span 8
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 8
°F
 ISO 75-2/Af
CLTE
     ASTM E831
Flow: -22 to 86°F
in/in/°F
  
Transverse: -22 to 86°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Verton* RV006ESV_GY7E071, LNP Verton RV006ESV_GY7E071, LNP* Verton* , LNP Verton, LNPVertonRV006ESV_GY7E071, LNPVerton, RV 006 ESV, RV006ESV, RV 006 ESV GY 7 E 071, RV006ESV_GY7E071, RV006ESV:GY7E071, RV006ESV/GY7E071, RV006ESV+GY7E071, RV006ESV-GY7E071, RV006ESV GY7E071, RV006, 006ESV, ESVGY, GY7, 7E, E071, RV006ESVGY7E071, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, SABIC IP, Polyamide66, Nylon66, 006RV
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Break
780*10*4
880*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.