IDES Prospector Already have an account? Login Here

IDES

LNP* Faradex* NX07344

Acrylonitrile Butadiene Styrene + PC

Glass Fiber Reinforcement; Stainless Steel Fiber

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Faradex* NX07344 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Faradex NX07344 is a compound based on PC+ABS blend resin containing non-brominated and non-chlorinated flame retardant system, Stainless Steel and glass fiber. Added features of this material include: EMI/RFI Shielding and ESD.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement
  • Stainless Steel Fiber
  
Features 
  • Bromine Free
  • Chlorine Free
  • Electromagnetic Shielding (EMI)
  • ESD Protection
  • Flame Retardant
  • Radio Frequency Shielding (RFI)
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage
     Internal Method
Flow
in/in
  
Across Flow
in/in
  
Water Absorption
      
24 hr, 50% RH
%
 ASTM D570
Equilibrium, 73°F, 50% RH
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Tensile Elongation
      
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/5
Flexural Modulus 4 (1.97 in Span)
psi
 ASTM D790
Flexural Strength
      
-- 5, 6
psi
 ISO 178
Yield, 1.97 in Span 4
psi
 ASTM D790
Break, 1.97 in Span 4
psi
 ASTM D790
Flexural Strain at Break 7
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 8 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact
      
-22°F
ft·lb/in
 ASTM D4812
73°F
ft·lb/in
 ASTM D4812
-22°F 9
ft·lb/in²
 ISO 180/1U
73°F 9
ft·lb/in²
 ISO 180/1U
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 11
--
°F
 ASTM D1525 12, ISO 306/B120 12
--
°F
 ISO 306/A50
CLTE
      
Flow: -40 to 104°F
in/in/°F
 ASTM E831
Flow: 73 to 140°F
in/in/°F
 ISO 11359-2
Transverse: -40 to 104°F
in/in/°F
 ASTM E831
Transverse: 73 to 140°F
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Shielding Effectiveness
     Internal Method
59.1 mil
dB
  
0.12 in
dB
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Faradex* NX07344, LNP Faradex NX07344, LNP* Faradex* , LNP Faradex, LNPFaradexNX07344, LNPFaradex, NX 07344, NX07344, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 07344NX
Features
Features may also be described by the following terms: Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free, Electromagnetic Shielding (EMI), EMI Shielding, Radio Frequency Shielding (RFI), RFI Shielding, Radio Frequency Interference Shielding, Electrostatic Discharge Protection, ESD Protection.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 0.20 in/min
40.051 in/min
50.079 in/min
6Yield
72 mm/min
880*10*4 sp=62mm
980*10*4
1080*10*4 mm
11Rate A (50°C/h), Loading 2 (50 N)
12Rate B (120°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.