IDES Prospector Already have an account? Login Here

IDES

LNP* Lubriloy* D20009

Polycarbonate

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Lubriloy* D20009 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP LUBRILOY* D20009 is a compound based on Polycarbonate resin containing Flame Retardant, Proprietary Lubricant. Added features of this material include: Flame Retardant.

Also known as: LNP* Lubriloy* Compound D-FR
Product reorder name: D20009
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Lubricant
Features 
  • Flame Retardant
  • Lubricated
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Strength
psi
 ASTM D790
Coefficient of Friction
     ASTM D3702 Modified
vs. Itself - Dynamic
 
  
vs. Itself - Static
 
  
Wear Factor - Washer
10^-10 in^5-min/ft-lb-hr
 ASTM D3702 Modified
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (73°F)
 
 ASTM D4812
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.126 in)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, Testing by SABIC
 
  
0.118 in, Testing by SABIC
 
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubriloy* D20009, LNP Lubriloy D20009, LNP* Lubriloy* , LNP Lubriloy, LNPLubriloyD20009, LNPLubriloy, D 20009, D20009, Polycarbonate, PC, SABIC IP Asia, 20009D
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.