IDES Prospector Already have an account? Login Here

IDES

LNP* Lubriloy* ZX06315

Polyphenylene Ether + SEBS + Polyolefin

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for LNP* Lubriloy* ZX06315 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Lubriloy* ZX06315 is a compound based on PPE+PS Blend resin containing Flame Retardant, Proprietary Lubricant. Added features of this material include: Internally Lubricated, Non-Brominated & Non-Chlorinated Flame Retardant, Flame Retardant, high HDT.

Also known as: LNP* Lubriloy* Compound ZX06315
Product Reorder name: ZX06315
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Lubricant
Features 
  • Bromine Free
  • Chlorine Free
  • Flame Retardant
  • Lubricated
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Volume-Flow Rate (MVR) (280°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ASTM D955
Flow: 24 hr
in/in
  
Across Flow: 24 hr
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 3
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 3
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 4 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 4
     ASTM D790
Yield, 1.97 in Span
psi
  
Break, 1.97 in Span
psi
  
Coefficient of Friction (vs. Itself - Dynamic)
 
 ASTM D3702 Modified
Wear Factor - Washer
10^-10 in^5-min/ft-lb-hr
 ASTM D3702 Modified
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
CLTE
     ASTM E831
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in, Testing by SABIC)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubriloy* ZX06315, LNP Lubriloy ZX06315, LNP* Lubriloy* , LNP Lubriloy, LNPLubriloyZX06315, LNPLubriloy, ZX 06315, ZX06315, Polyphenylene Ether + SEBS + Polyolefin, Polyphenylene Ether SEBS Polyolefin, Polyphenylene Ether : SEBS : Polyolefin, Polyphenylene Ether / SEBS / Polyolefin, Polyphenylene Ether - SEBS - Polyolefin, Polyphenylene Ether _ SEBS _ Polyolefin, Polyphenylene Ether SEBS Polyolefin, PPE+SEBS+Polyolefin, PPESEBSPolyolefin, PPE:SEBS:Polyolefin, PPE/SEBS/Polyolefin, PPE-SEBS-Polyolefin, PPE_SEBS_Polyolefin, PPE SEBS Polyolefin, Polyphenylene Ether, PPE, SABIC IP Asia, PolyphenyleneEtherSEBSPolyolefin, PolyphenyleneEther, PolyphenyleneEther_SEBS_Polyolefin, 06315ZX
Features
Features may also be described by the following terms: Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 2.0 in/min
40.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.