LNP Thermocomp C7410 SABIC IP Asia Acrylonitrile Butadiene Styrene + PC (Talc Filler)

Product Description

LNP* Thermocomp* C7410 compound is a talc-filled PC+ABS, nonhalogenated FR for thinwall molding applications.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Filler / Reinforcement

Talc Filler

Features

Flame Retardant

Halogen Free

Uses

Thin-walled Parts

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (260°C/2.16 kg)		g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/2.16 kg)		in³/10min	ISO 1133
Molding Shrinkage			Internal Method
Flow: 0.126 in		in/in
Across Flow: 0.126 in		in/in
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--²		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield³		psi	ASTM D638
Yield		psi	ISO 527-2/5
Break³		psi	ASTM D638
Break		psi	ISO 527-2/5
Tensile Elongation
Yield³		%	ASTM D638
Yield		%	ISO 527-2/5
Break³		%	ASTM D638
Break		%	ISO 527-2/5
Flexural Modulus
1.97 in Span⁴		psi	ASTM D790
--⁵		psi	ISO 178
Flexural Strength
--^5, 6		psi	ISO 178
Yield, 1.97 in Span⁴		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁷ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁸		ft·lb/in²	ISO 180/1A
73°F⁸		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 0.252 in		°F	ASTM D648
264 psi, Unannealed, 2.52 in Span⁹		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ASTM D1525¹⁰, ISO 306/B50¹⁰
--		°F	ISO 306/B120
CLTE			ASTM E831, ISO 11359-2
Flow: -40 to 104°F		in/in/°F
Transverse: -40 to 104°F		in/in/°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
--
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermocomp* C7410, LNP Thermocomp C7410, LNP* Thermocomp* , LNP Thermocomp, LNPThermocompC7410, LNPThermocomp, C 7410, C7410, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 7410C
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Drying Time, Maximum		hr
Suggested Max Moisture		%
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Vent Depth		in

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³Type I, 0.20 in/min

⁴0.051 in/min

⁵0.079 in/min

⁶Yield

⁷80*10*4 sp=62mm

⁸80*10*4

⁹80*10*4 mm

¹⁰Rate B (120°C/h), Loading 2 (50 N)

LNP* Thermocomp* C7410

Acrylonitrile Butadiene Styrene + PC

Talc Filler

Supplied by SABIC Innovative Plastics Asia Pacific