IDES Prospector Already have an account? Login Here

IDES

APTIV® 1103-050

Polyetheretherketone

Mineral Filler

Supplied by Victrex plc

The technical datasheet with complete property values for APTIV® 1103-050 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
APTIV® 1100 series films are the mineral filled semi-crystalline films made from VICTREX® PEEK™ polymer. The film provides a material solution for engineers in ultra-high performance applications.

APTIV films are a comprehensive range of versatile, high-performance films, the use of which can facilitate reduced systems costs, improved performance and enhanced design freedom.

APTIV 1100 has a unique combination of properties providing high temperature performance, mechanical strength, durability, excellent radiation, hydrolysis and chemical resistance, electrical insulation, excellent barrier properties with high purity, good flammability without the use of flame retardants, low toxicity of combustion products, and low moisture absorption in a film format. Inherently halogen free and ease of processing makes APTIV films a technology enabler for our customers and end users. APTIV 1100 series provides a higher modulus and lower coefficient of linear thermal expansion over the APTIV 1000 series.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Mineral Filler
Features 
  • Barrier Resin
  • Clean/High Purity
  • Durable
  • Electrically Insulating
  • Excellent Printability
  • Flame Retardant
  • Good Adhesion
  • Good Chemical Resistance
  • Good Processability
  • Good Toughness
  • Halogen Free
  • Heat Sealable
  • High Heat Resistance
  • High Strength
  • Hydrolysis Resistant
  • Laser Markable
  • Low Moisture Absorption
  • Low Smoke Emission
  • Low Toxicity
  • Machinable
  • Metallizable
  • Radiation (Gamma) Resistant
  • Recyclable Material
  • Semi Crystalline
  • Weldable
Uses 
  • Diaphrams
  • Electrical/Electronic Applications
  • Film
  • Insulation
  • Labels
  • Laminates
  • Membranes
  • Printed Circuit Boards
Agency Ratings 
RoHS Compliance 
Appearance 
  • Matte Finish
Forms 
  • Film
Processing Method 
  • Coating
  • Laminating
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density 2 (73°F)
g/cm³
 ISO 1183
Molding Shrinkage (392°F, 0.00197 in)
%
 Internal Method
Water Absorption 3 (Equilibrium, 73°F, 0.00197 in, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.00197 in)
psi
 ISO 527-2
Tensile Stress (Break, 73°F, 0.0197 in)
psi
 ISO 527-2
Tensile Strain (Break, 73°F, 0.00197 in)
%
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Film Thickness - Recommended / Available
 
  
Trouser Tear Resistance 4 (2.0 mil)
lbf/in
 ISO 6383-1
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow 5 (0.00197 in)
in/in/°F
 ASTM D696
Thermal Conductivity
     ASTM E1461
-- 6
Btu·in/hr/ft²/°F
  
-- 7
Btu·in/hr/ft²/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 8 (73°F, 0.00197 in)
ohm·cm
 ASTM D257
Dielectric Strength (73°F, 0.00197 in)
V/mil
 ASTM D149
Dielectric Constant (73°F, 0.00197 in, 10 MHz)
 
 ASTM D150
Dissipation Factor (73°F, 0.00197 in, 10 MHz)
 
 ASTM D150
Additional Information
Nominal Value
Unit
Test Method
Puncture Resistance (73°F, 2.0 mil)
ft·lb/in²
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: APTIV® 1103-050, APTIV 1103050, APTIV® , APTIV, APTIV1103050, 1103, 1103-050, 1103050, 1103:050, 1103/050, 1103+050, 1103_050, 1103 050, Polyetheretherketone, PEEK, Polyaryletherketone, PAEK, Victrex, 0501103
Features
Features may also be described by the following terms: Semi-Crystalline, High Heat Resistance, High Strength, Radiation Resistant, Gamma Stable, Gamma Resistant, Radiation Stable, Good Chemical Resistance, Chemical Resistant, Good Adhesion, High Purity, Clean, High Cleanliness, Zero Halogen Content, Halogen Free, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Low Toxicity, Good Processability, Easy Processing, Low Smoke Emission, Good Toughness, Tough, Excellent Printability, Printable.
Uses
Uses may also be described by the following terms: Printed Circuit Boards, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (2), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
250 µm
324 hrs, 23°C
423°C
5below Tg
6Through Plane
7In-Plane
8100 V
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.