IDES Prospector Already have an account? Login Here

IDES

LNP* Colorcomp* J1000R

Polyethersulfone

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Colorcomp* J1000R is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* COLORCOMP* J1000R is a compound based on Polyethersulfone resin. Added features include : Mold Release
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage - Flow
in/in
Internal Method
Water Absorption (73°F, 24 hr)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress
    ISO 527-2/50
Yield
psi
 
Break
psi
 
Tensile Strain (Yield)
%
ISO 527-2/50
Flexural Modulus 2
psi
ISO 178
Flexural Strength 2, 3
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
 
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5 (264 psi, Unannealed, 2.52 in Span)
°F
ISO 75-2/Af
CLTE
    ISO 11359-2
Flow: 73 to 140°F
in/in/°F
 
Transverse: 73 to 140°F
in/in/°F
 
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Colorcomp* J1000R, LNP Colorcomp J1000R, LNP* Colorcomp* , LNP Colorcomp, LNPColorcompJ1000R, LNPColorcomp, J 1000 R, J1000R, J1000, 1000R, Polyethersulfone, PESU, Polysulfone, PSU, SABIC IP Euro, 1000J
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Yield
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.