IDES Prospector Already have an account? Login Here

IDES

LNP* Faradex* NSL121

Acrylonitrile Butadiene Styrene + PC

Stainless Steel Fiber

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Faradex* NSL121 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Faradex* NSL121 is a compound based on PC+ABS Blend resin containing Stainless Steel Fiber, PTFE, Flame Retardant. Added features include: Electrically Conductive, EMI/RFI Shielding, Internally Lubricated, Flame Retardant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Stainless Steel Fiber
Additive 
  • PTFE Lubricant
Features 
  • Electrically Conductive
  • Electromagnetic Shielding (EMI)
  • Flame Retardant
  • Lubricated
  • Radio Frequency Shielding (RFI)
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/5
Tensile Strain (Yield)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2, 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5 (264 psi, Unannealed, 2.52 in Span)
°F
 ISO 75-2/Af
CLTE
     ISO 11359-2
Flow: 73 to 140°F
in/in/°F
  
Transverse: 73 to 140°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in, Testing by SABIC)
 
 UL 94
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Faradex* NSL121, LNP Faradex NSL121, LNP* Faradex* , LNP Faradex, LNPFaradexNSL121, LNPFaradex, NSL 121, NSL121, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Euro, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 121NSL
Features
Features may also be described by the following terms: Electrically Conductive, Conducts Electricity, Conductive, Electromagnetic Shielding (EMI), EMI Shielding, Radio Frequency Shielding (RFI), RFI Shielding, Radio Frequency Interference Shielding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Yield
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.