IDES Prospector Already have an account? Login Here

IDES

LNP* Lubricomp* CGI11

High Impact Polystyrene

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Lubricomp* CGI11 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP * Lubricomp* CGI11 is a compound based on Polystyrene resin containing Graphite. Added features include: Internally Lubricated.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Graphite Powder Lubricant
Features 
  • Lubricated
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 2 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 2 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 3 (264 psi, Unannealed, 2.52 in Span)
°F
 ISO 75-2/Af
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubricomp* CGI11, LNP Lubricomp CGI11, LNP* Lubricomp* , LNP Lubricomp, LNPLubricompCGI11, LNPLubricomp, CGI 11, CGI11, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, SABIC IP Euro, PolystyreneHighImpact, PSHIPS, 11CGI
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
280*10*4
380*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.