IDES Prospector Already have an account? Login Here

IDES

LNP* Lubricomp* DFL34XXP

Polycarbonate

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Lubricomp* DFL34XXP is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Lubricomp* DFL-4034 HP is a compound based on Polycarbonate resin containing Glass Fiber, PTFE.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • PTFE Lubricant
Features 
  • Lubricated
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow 2
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 3
psi
 ISO 178
Flexural Strength 3, 4
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 5 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 5 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 6
      
66 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Af
CLTE
     ISO 11359-2
Flow: 73 to 140°F
in/in/°F
  
Transverse: 73 to 140°F
in/in/°F
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Lubricomp* DFL34XXP, LNP Lubricomp DFL34XXP, LNP* Lubricomp* , LNP Lubricomp, LNPLubricompDFL34XXP, LNPLubricomp, DFL 34 XXP, DFL34XXP, DFL34, 34XXP, Polycarbonate, PC, SABIC IP Euro, 34DFL
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.079 in/min
4Yield
580*10*4
680*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.