IDES Prospector Already have an account? Login Here

IDES

LNP* Stat-Loy* P3000U

Polyamide 6

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Stat-Loy* P3000U is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Stat-loy* P3000U is a compound based on PA 6 resin. Added features include; Antistatic, UV - Stabilized.

Also known as: LNP* Stat-Loy* Compound P-UV NAT
Product Reorder name: P3000U
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
  • UV Stabilizer
  
Features 
  • Antistatic
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow
in/in
 Internal Method
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/50
Yield
psi
  
Break
psi
  
Tensile Strain (Yield)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2, 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
 
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5
      
66 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Af
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 ASTM D257
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Stat-Loy* P3000U, LNP StatLoy P3000U, LNP* Stat-Loy* , LNP StatLoy, LNP* Stat:Loy*, LNP* Stat/Loy*, LNP* Stat+Loy*, LNP* Stat_Loy*, LNP* Stat Loy*, LNPStatLoyP3000U, LNPStatLoy, LNP Stat_Loy, LNP Stat Loy, LNPStat_Loy, P 3000 U, P3000U, P3000, 3000U, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, SABIC IP Euro, Polyamide6, Nylon6, 3000P
Generic Name
Generic Name may also be described by the following terms: PA6.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Yield
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.