IDES Prospector Already have an account? Login Here

IDES

LNP* Thermocomp* CF006

High Impact Polystyrene

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Thermocomp* CF006 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Thermocomp* CF006 is a compound based on Polystyrene resin containing Glass Fiber.

Also known as: LNP* Thermocomp* Compound PS F 30V
Product reorder name: CF006
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage - Flow (24 hr)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2, 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5
      
66 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Af
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermocomp* CF006, LNP Thermocomp CF006, LNP* Thermocomp* , LNP Thermocomp, LNPThermocompCF006, LNPThermocomp, CF 006, CF006, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, SABIC IP Euro, PolystyreneHighImpact, PSHIPS, 006CF
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Break
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.