IDES Prospector Already have an account? Login Here

IDES

LNP* Thermocomp* DF002ER

Polycarbonate

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Thermocomp* DF002ER is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* THERMOCOMP* DF002ER is a compound based on Polycarbonate resin containing Glass Fiber. Added features include Easy Molding, Mold Release.

Also known as: LNP* Thermocomp* Compound DF-1002 EM MR
Product Reorder name: DF002ER
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • Mold Release
Features 
  • Good Moldability
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/5
Tensile Strain (Yield)
%
 ISO 527-2/5
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2, 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5
      
66 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Bf
264 psi, Unannealed, 2.52 in Span
°F
 ISO 75-2/Af
CLTE - Flow (73 to 140°F)
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in
 
  
0.118 in
 
  
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermocomp* DF002ER, LNP Thermocomp DF002ER, LNP* Thermocomp* , LNP Thermocomp, LNPThermocompDF002ER, LNPThermocomp, DF 002 ER, DF002ER, DF002, 002ER, Polycarbonate, PC, SABIC IP Euro, 002DF
Features
Features may also be described by the following terms: Good Moldability.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Break
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.