IDES Prospector Already have an account? Login Here

IDES

LNP* Thermotuf* OF008EI

Polyphenylene Sulfide

Glass Fiber Reinforcement

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for LNP* Thermotuf* OF008EI is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LNP* Thermotuf* OF008EI is a compound based on PPS-Linear resin, containing Glass Fiber. Added features include : High Impact and Easy Molding.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Good Moldability
  • High Impact Resistance
  • Linear Polymer Structure
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Molding Shrinkage - Flow
in/in
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1
Tensile Stress (Break)
psi
ISO 527-2/5
Tensile Strain (Break)
%
ISO 527-2/5
Flexural Modulus 2
psi
ISO 178
Flexural Strength 2, 3
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength 4 (73°F)
ft·lb/in²
ISO 180/1A
Unnotched Izod Impact Strength 4 (73°F)
ft·lb/in²
ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 5 (264 psi, Unannealed, 2.52 in Span)
°F
ISO 75-2/Af
CLTE
    ISO 11359-2
Flow: 73 to 140°F
in/in/°F
 
Transverse: 73 to 140°F
in/in/°F
 
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: LNP* Thermotuf* OF008EI, LNP Thermotuf OF008EI, LNP* Thermotuf* , LNP Thermotuf, LNPThermotufOF008EI, LNPThermotuf, OF 008 EI, OF008EI, OF008, 008EI, Polyphenylene Sulfide, PPS, SABIC IP Euro, PolyphenyleneSulfide, 008OF
Features
Features may also be described by the following terms: High Impact Resistance, Good Moldability, Linear Polymer.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Back Pressure
psi
 
Screw Speed
rpm
 
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Yield
480*10*4
580*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.