IDES Prospector Already have an account? Login Here

IDES

HIPOLEN P® EH 7

Polypropylene Homopolymer

Supplied by HIPOL A.D.

The technical datasheet with complete property values for HIPOLEN P® EH 7 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/D
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/A50
Thermal Stability 2 (302°F)
month
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPOLEN P® EH 7, HIPOLEN P EH 7, HIPOLEN P® , HIPOLEN P, HIPOLENPEH7, HIPOLENP, EH 7, EH7, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Hipol, PolypropyleneHomopolymer, PPHomopolymer, 7EH
Notes
1Typical properties: these are not to be construed as specifications.
2Vacuum chamber
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.