AQUAMID 66G25V0EFI Aquafil Polyamide 66 (Glass Fiber Reinforcement, 25%)

Product Description

PA 66, 25%glass fibre reinforced, flame retardant, halogen and red phosphorous free, GWIT=775°C, for injection moulding

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage (73°F)		%	ISO 2577
Water Absorption (Saturation, 73°F)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180/1A
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale, 73°F)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306
Melting Temperature		°F	DSC
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Burning Rate		in/min	FMVSS 302
Flame Rating - UL			UL 94
Glow Wire Flammability Index		°F	IEC 60695-2-12
Glow Wire Ignition Temperature		°F	IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AQUAMID 66G25V0EFI, AQUAMID , AQUAMID66G25V0EFI, 66 G 25 V 0 EFI, 66G25V0EFI, 66G, G25, 25V, V0, 0EFI, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Aquafil, Polyamide66, Nylon66, G66
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Zero Halogen Content, Halogen Free, Low Phosphorus Content.

Notes

¹Typical properties: these are not to be construed as specifications.

AQUAMID 66G25V0EFI