IDES Prospector Already have an account? Login Here

IDES

Surlyn® 1652-E

Ionomer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Surlyn® 1652-E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
DuPont™ Surlyn® 1652-E is for use in blown/cast film and extrusion coating operations. It can be used in both extrusion and coextrusion equipment designed to process polyethylene resins.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Uses 
  • Cast Film
  • Coating Applications
  • Film
  • Food Packaging
  • Liners
  • Pharmaceutical Packaging
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
  • Coextrusion
  • Extrusion
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Spencer Impact
ft·lb/in
 ASTM D3420
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Peak Melting Temperature
°F
 ASTM D3418, ISO 3146
Freezing Point
°F
 ASTM D3417
Optical
Nominal Value
Unit
Test Method
Gloss (20°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: Surlin

Product names can be difficult to match. You may have searched any one of these terms to find this product: Surlyn® 1652-E, Surlyn 1652E, Surlyn® , Surlyn, Surlyn1652E, 1652, 1652-E, 1652E, 1652:E, 1652/E, 1652+E, 1652_E, 1652 E, Ionomer, DuPont P&IP, E1652
Uses
Uses may also be described by the following terms: Cast Film, Food Packaging, Pharmaceutical Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Blown Film Processing
Feed Zone 135°C (275°F)
Compression Zone 163°C (325°F)
Third Zone 177°C (351°F)
Fourth Zone 177°C (351°F)
Fifth Zone 177°C (351°F)
Die Zone 177°C (351°F)
Melt Zone 177°C (351°F)
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.