IDES Prospector Already have an account? Login Here

IDES

ARMAMID® PA SVMN 30.1

Polyamide 6

Supplied by Poly Plastic

The technical datasheet with complete property values for ARMAMID® PA SVMN 30.1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
  
Molding Shrinkage
%
  
Water Absorption
      
73°F, 24 hr
%
 ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
  
Flexural Modulus (73°F)
psi
  
Flexural Strength
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (68°F)
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
  
Melting Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
      
-- 2
ohm
  
-- 3
ohm
  
Volume Resistivity
      
-- 2
ohm·cm
  
-- 3
ohm·cm
  
Electric Strength
      
-- 2
V/mil
  
-- 3
V/mil
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ARMAMID® PA SVMN 30.1, ARMAMID PA SVMN 301, ARMAMID® , ARMAMID, ARMAMIDPASVMN301, PA SVMN 30 1, PA SVMN 30.1, PA SVMN 301, PASVMN, SVMN30, 301, PASVMN301, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, PolyPlastic, Polyamide6, Nylon6, SVMNPA
Generic Name
Generic Name may also be described by the following terms: PA6.
Notes
1Typical properties: these are not to be construed as specifications.
2Wet
3Dry
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.