IDES Prospector Already have an account? Login Here

IDES

EFRHATAN 86

Polyurethane (Polyether based)

Supplied by Crosspolimeri S.p.A.

The technical datasheet with complete property values for EFRHATAN 86 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EFRHATAN 86 is a modified polyurethane (PUR).
EFRHATAN 86 is ether based, it is suitable for technical sheathing.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Uses 
  • Cable Jacketing
  • Wire & Cable Applications
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
ISO 527-2
Tensile Strain (Break)
%
ISO 527-2
Abrasion Resistance
mm³
DIN 53516
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
DIN 53515
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
ISO 868
Thermal
Nominal Value
Unit
Test Method
Cold Flexibility
°F
ISO 458
Service Temperature
°F
 
Thermal Stability
hr
ISO 182
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (212°F, 168 hr)
%
UL 1581
Change in Tensile Strain at Break in Air (212°F, 168 hr)
%
UL 1581
Change in Tensile Stress (64°F, 121 hr, in ASTM #2 Oil)
%
UL 1581
Change in Tensile Strain at Break (64°F, 121 hr, in ASTM #2 Oil)
%
UL 1581
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
Oxygen Index
%
ISO 4589-2
Additional Information
Nominal Value
Unit
Test Method
Resistance Against Saponification
mg KOH/g
HD 22.10 S1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EFRHATAN 86, EFRHATAN , EFRHATAN86, 86, Polyurethane, Polyurethane (Polyether based), Polyurethane Polyether based, PUR-Ether, PUREther, PUR:Ether, PUR/Ether, PUR+Ether, PUR_Ether, PUR Ether, PUR, Crosspolimeri, PolyurethanePolyetherbased
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 2 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 4 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.