IDES Prospector Already have an account? Login Here

IDES

Ad-Tech Epoxy EL-311

Epoxy; Epoxide

Supplied by Ad-Tech Plastic Systems Corp.

The technical datasheet with complete property values for Ad-Tech Epoxy EL-311 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • High Strength
  • Low Toxicity
  • Low Viscosity
  
Uses 
  • Laminates
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Laminating
Physical
Nominal Value
Unit
Test Method
Apparent Density
g/cm³
 ASTM D1895
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Flexural Strength (Yield)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life (77°F)
min
  
Thermoset Mix Viscosity
cP
 ASTM D2393
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ad-Tech Epoxy EL-311, AdTech Epoxy EL311, Ad-Tech Epoxy , AdTech Epoxy, Ad:Tech Epoxy, Ad/Tech Epoxy, Ad+Tech Epoxy, Ad_Tech Epoxy, Ad Tech Epoxy, AdTechEpoxyEL311, AdTechEpoxy, Ad_TechEpoxy, EL, EpoxyEL-311, EpoxyEL311, EpoxyEL:311, EpoxyEL/311, EpoxyEL+311, EpoxyEL_311, EpoxyEL 311, EpoxyEL, EL-311, EL311, EL:311, EL/311, EL+311, EL_311, EL 311, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, Ad-Tech, EpoxyEpoxide, 311EL, 311EpoxyEL
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Strength, Low Toxicity, Low Viscosity.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.