IDES Prospector Already have an account? Login Here

IDES

HIPREN® EM 1712 T TDAE

Emulsion Styrene Butadiene Rubber

Supplied by HIP-PetroHemija

The technical datasheet with complete property values for HIPREN® EM 1712 T TDAE is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HIPREN® EM 1712 T TDAE (HIPREN EM 1723) contains 23.5% styrene bounded in polymer. It is extended with 37.5 parts (w/w) of low aromatic TDAE oil per 100.0 parts (w/w) of polymer. The rubber is produced by low temperature emulsion copolymerization process with the use of resin and fatty acids soaps as emulsifiers and is coagulated by acid. The rubber contains a staining stabiliser added during the production process. The product is without nitrosoamine.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Agency Ratings 
Forms 
  • Bale
Physical
Nominal Value
Unit
Test Method
Mooney Viscosity - ML 1+4 (212°F)
MU
 ISO 289
Bound Styrene
%
 ISO 2453
Ash Content
wt%
 ISO 247
Organic Acid
wt%
 ISO 7781
Soap
wt%
 ISO 7781
Stabilizer 2
wt%
  
Volatile Matter
wt%
 ISO 248
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress (300% Strain)
psi
 ISO 37
Tensile Stress (Break)
psi
 ISO 37
Tensile Elongation (Break)
%
 ISO 37
Rebound Resilience
%
 ISO 4662
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Cure Time 3
     ISO 6502
50%: 320°F
min
  
90%: 320°F
min
  
ETA Extract
wt%
 ASTM D5774
Scorch Time 3 (320°F)
min
 ISO 6502
Torque 3
     ISO 6502
Maximum: 320°F
dNm
  
Minimum: 320°F
dNm
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HIPREN® EM 1712 T TDAE, HIPREN EM 1712 T TDAE, HIPREN® , HIPREN, HIPRENEM1712TTDAE, EM 1712 T TDAE, EM1712, 1712T, TTDAE, EM1712TTDAE, Styrene Butadiene Rubber, Emulsion, Styrene Butadiene Rubber Emulsion, SBR, Emulsion, SBR Emulsion, Polybutadiene Rubber, PBR, HIP-PetroHemija, StyreneButadieneRubberEmulsion, SBREmulsion, PolybutadieneRubber, 1712EM
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Notes
1Typical properties: these are not to be construed as specifications.
210.4.2.1
3Standard Test Recipie: ISO 2322; Mixing Procedure: ISO 2393; Carbon Black: IRB 7; Curemeter Test: Reometar MDR 2000; Conditions: Arc 0.5°
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.