IDES Prospector Already have an account? Login Here

IDES

Braskem PE CX 7020

Low Density Polyethylene

Supplied by Braskem

The technical datasheet with complete property values for Braskem PE CX 7020 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CX7020 is a low-density polyethylene (LDPE), excellent processability, and low gel content. Those features allow a production of thin and highly uniform films. This product is identified as PE 113 according to ASTM D-4976-04a standard specification.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Foamable
  • Good Processability
  • Low Gel
Uses 
  • Film
  • Laminates
  
Agency Ratings 
Processing Method 
  • Film Extrusion
  • Foam Processing
  • Injection Blow Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Strength
     ASTM D882
MD: Break, 2.0 mil, Blown Film
psi
  
TD: Break, 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Dart Drop Impact (2.0 mil, Blown Film)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 2.0 mil, Blown Film
g
  
TD: 2.0 mil, Blown Film
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Braskem PE CX 7020, Braskem PE , BraskemPECX7020, BraskemPE, PECX 7020, PE, PECX7020, CX 7020, CX7020, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, Braskem, PolyethyleneLowDensity, 7020CX, 7020PECX
Features
Features may also be described by the following terms: Low Gel, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.