IDES Prospector Already have an account? Login Here

IDES

ASTALOY™ PC/ASA 407

Acrylonitrile Styrene Acrylate + PC

Supplied by Marplex Australia Pty. Ltd.

The technical datasheet with complete property values for ASTALOY™ PC/ASA 407 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ASTALOY™ PC/ASA 407 is a specialty modified alloy of ASA and Polycarbonate which is designed for automotive injection moulding applications requiring a exceptional depth of dark colours as well as balance of UV stability, impact toughness, product rigidity, heat resistance and mouldability. Typical applications include exterior automotive coloured grilles, station wagon roof rails and B-pillars.

Note: The letters "U" or "W" indicate additional UV stabilisation has been incorporated [ ie: ASTALOY™ PC/ASA 407U ].

UV stabilized version meets: GM, GMW15583P-ASA+PC-T4
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  • South America
Features 
  • Good Impact Resistance
  • Good Moldability
  • Good UV Resistance
  • Medium Heat Resistance
  • Medium Rigidity
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  
Automotive Specifications 
  •  1
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/3.8 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.118 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (0.126 in)
psi
 ASTM D638
Tensile Elongation 3 (Break, 0.126 in)
%
 ASTM D638
Flexural Modulus 4 (0.126 in)
psi
 ASTM D790
Flexural Strength 4 (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Gardner Impact (0.126 in)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.500 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature (0.0630 in)
°F
 AS/NZS 60695.2.12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASTALOY™ PC/ASA 407, ASTALOY PCASA 407, ASTALOY™ , ASTALOY, ASTALOYPCASA407, PC, PC/ASA 407, PCASA 407, PC:ASA 407, PC+ASA 407, PC-ASA 407, PC_ASA 407, PC ASA 407, PCASA, ASA407, PCASA407, PC_ASA407, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, Marplex, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, ASAPC
Features
Features may also be described by the following terms: Good Impact Resistance, Good Moldability, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Medium Heat Resistance, Medium Rigidity, Good Rigidity.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Notes
1UV stabilized version
2Typical properties: these are not to be construed as specifications.
32.0 in/min
40.051 in/min
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.