IDES Prospector Already have an account? Login Here

IDES

Marvel™ M10BKT1

Polyethylene

Supplied by SCG Chemicals Co., Ltd.

The technical datasheet with complete property values for Marvel™ M10BKT1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M10BKT1(P) is a black-compounded polyethylene specifically developed for rotational molding applications. With a balance of stiffness and toughness, a large processing window and a wide variety of color selection. M10BKT1(P) is the black version of M3804RWP recommended materials for water tanks, septic tanks, playground equipment, and other general rotomolded articles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Carbon Black (2%)
Features 
  • Food Contact Acceptable
  • Good Stiffness
  • Good Toughness
  • Recyclable Material
  
Uses 
  • Automotive Applications
  • Septic Tanks
  • Tanks
Agency Ratings 
 
Appearance 
  • Black
Forms 
  • Granules
  • Powder
  
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Carbon Black Content
%
 ASTM D1603
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
ARM Impact - Rotomolded (-40°F, 0.20 in)
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
Nominal Value
Unit
Test Method
UV Resistance
 
 ASTM D2565
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marvel™ M10BKT1, Marvel M10BKT1, Marvel™ , Marvel, MarvelM10BKT1, M 10 BKT 1, M10BKT1, M10, 10BKT, BKT1, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, SCG, PolyethyleneUnspecified, PEUnspecified, 10M
Features
Features may also be described by the following terms: Good Stiffness, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Septic Tankcs, Automotive Applications, Automotive Sector.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), TIS (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.