IDES Prospector Already have an account? Login Here

IDES

Marvel™ M1C

Polyethylene

Supplied by SCG Chemicals Co., Ltd.

The technical datasheet with complete property values for Marvel™ M1C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M1C is an economical PE black compound for general-purpose rotomolding applications. The resin is formulated to have a balance of stiffness, toughness, and processability. It is recommended for cost-conscious or non-critical applications, such as small to medium size containers, pallets, bins, inner-layer, etc. M1C comes with both antioxidants and UV stabilizers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Additive 
  • Antioxidant
  • Carbon Black (2%)
  • UV Stabilizer
Features 
  • Antioxidant
  • Good Processability
  • Good Stiffness
  • Good Toughness
  • Recyclable Material
Uses 
  • Containers
  • Lawn and Garden Equipment
  
Appearance 
  • Black
Forms 
  • Granules
  • Powder
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Carbon Black Content
%
 ASTM D1603
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
ARM Impact - Rotomolded (-40°F, 0.20 in)
ft·lb/in
  
Izod Impact (73°F)
psi
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marvel™ M1C, Marvel M1C, Marvel™ , Marvel, MarvelM1C, M 1 C, M1C, M1, 1C, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, SCG, PolyethyleneUnspecified, PEUnspecified, 1M
Features
Features may also be described by the following terms: Good Stiffness, Good Processability, Easy Processing, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Lawn and Garden Equipment, Lawn Equipment, Garden Equipment.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.